Category Archives: Design

A New Year with Goals and Ideas

Welcome 2013!

Ok.  I’m a bit late in welcoming the New Year, but I have been very busy giving a workshop during the 2nd week of the month and then spending a number of days rearranging my studio for better traffic flow.  So far this year I’m teaching in Canada, at my home studio, and will be teaching at the Santa Fe Beadfest. I always enjoy a trip to Santa Fe, and this year will be especially great as two good friends from my Pennsylvania Society of Goldsmiths days will come for a visit.

Last year was especially wonderful, with every week filled with workshops or teaching or traveling.  It was great, but exhausting.  The  year ended with 3 packed workshops at Beadfest Texas and the filming of my next DVD, “Artisan Bails”, which will be a much less calorie filled Valentine’s present  from your loved ones than a big box of chocolates.  So order soon to avoid the rush of first day orders!  (Shamless promotion here!)

sketchbook

Also, on a sad note, the Beadfest Texas is no more.  I know there will be much gnashing of teeth, but the choice was not mine, and I have already heard from many students who are heart broken.  I am, too, because I loved the drive back home every year.  I will miss all my Texas students–a lot!  Let’s try to keep in touch and no telling what will happen–maybe a Texas reunion someplace.

So I will try to make it up to some of you by posting more often.  Last year’s schedule just prohibited me taking the time to write posts, so my promise to you is to keep you updated on jewelry trends and tips on jewelry making.  Nothing fancy, I’ll continue to write just as I talk, so I will be sitting right alongside of you, helping you though any technique you wish.   But let me know what you want.  If I don’t hear from you then you may just get boring stories of life with 3 cats.

As this issue’s tip, I want to share how I design.  There is a bit of info coming out in the April issue of Lapidary Journal Jewelry Artist with my ammonite earring design.  I show a bit in the Artisan Bails DVD, too, but I don’t have time in either place to fully explain it.

It basically works like this:  You draw a design in your sketch book, and use tracing paper to alter the design.   Lay the paper on top of the design, and redraw with the addition of an element, say a small spiral.  Now fold the tracing paper over that drawing and redraw, maybe making the spiral a bit larger.  Keep doing this, changing the design each time, until you are happy with an idea.  Then redraw this in your sketchbook, adding all the details such as stone color, textures, noting different metals, etc.  I have found that when I am really stumped, this helps. What is more important, if I am working with a stone I find the process easier to draw around the stone and just play with ideas.  Yes, I do have days when something just won’t work out…and I do have days when I write in my sketchbook, “These all look horrible.”  Its ok.  We all have days like that, but just don’t give up.  Change stones.  Look at your old idea book.  Look to nature (She’s my greatest inspiration.)

We will discuss this more later in the year. I just want you to get started.  I have so many goals this year, and one is to help you in any way I can.  I’ll share ideas and tips with you as we travel though 2013 together.  I also want to share some of the many questions I receive from my readers and DVD watchers.  If you have special questions, please send them to me at lexi.erickson@mac.com.  I’ll answer them to the best of my ability and quickly. There will be some surprises which I hope you will like too.  I just want to get back in touch.

Hugs,

Lexi

Oh No!! Someone Copied my Work!

I remember my first cover for Lapidary Journal Jewelry Artist.  I wish I could say I was thrilled.  I was horrified.  I always imagined my first cover would be beautiful, elegant  and colorful.  I would be so proud of it.. Well…not even close.  It came from the step by step  in that issue, and later I found a number of people really liked those earrings and attempted making them.  Now I laugh and accept the cover…sometimes. They were simple cones, and I certainly don’t have a copyright on a cone.  Since then, Todd Reed has riffed on a cone design, and so has Phil Porrier.  But I have no reason to be angry, a cone is a cone, and I get to tease Todd about how his look like mine (OH, how I wish!)  But there are only so many things you can do with a cone when you are teaching beginning jewelers, and the magazine asked for a beginning project.  Since then I hope I have redeemed myself with other more graceful and complicated projects.

But as a teacher, my students sometimes cry  ”Someone copied my work!”  Well, I write step-by-step projects for  Lapidary Journal Jewelry Artist, the 65-year old leading art jewelry teaching magazine, so don’t expect any sympathy from me.  I struggle over designs just as hard as you, and then put them out there for them to be made world wide.  Without you knowing it, if you post all your work on the  www, you will be copied, too.

Not only do people copy my step-by-steps,  but  also what I put out in the Contributor’s Page, which is not taught in the magazine.  Some people even send me the photos of what they have made when they were  inspired by my work.  Some look like my pieces,  some are way off base but they tried.  They are learning, and they liked my piece enough to try an copy it.  I am sincerely flattered.

I know one teacher who teaches the technique project, and then get upsets if the student makes something that looks like it.  That’s not nice.  If you teach, your student ‘s work may emulate your work.  That’s just part of the game.  They will soon find their wings and their own style.  Be happy that you were part of the process. But what about those of  you who are not teaching?  Your work gets copied, and suddenly something appears in a store or gallery, or just a photo shared online, and it looks like yours?  Does that upset you?   Now, think about why.  Is it because the other person’s may sell, and yours may not?  Believe me, everything will sell if you find the right niche.  Is it because you were so brilliant that nothing like this has ever been done before?  Well, maybe, I have seen several artists whom I consider brilliant, but in the history of the world, there MAY have been something that looks similar.    What can you do about it?

Oh, you have a copyright?  Ok, your copyright is only as good as the money you have to defend it.  Don’t worry.  A lawyer will get most of the money, anyway.

One day at the Peter’s Valley Craft Show in Layton, N.J., I was horrified to find “my” piece in the collection being shown and sold by a very  well-known artist..  I had just designed and made this same design, and though the stones were different, the design was exact.  EXACT.  Size and everything.   I hadn’t seen his piece, and I’m pretty sure he hadn’t seen mine.  So I approached the artist, and told him I had just designed one just like it, I hope he wasn’t offended.  He laughed, and said “Well, then I think you are a pretty good designer.  I just finished this piece, and there’s only a few things to do with that shape stone. I hope yours sells, too.”  What a gracious professional.

In my  my first semester of college jewelry I did try  to copy a piece of Jeff Wise’s work.  His stuff is gorgeous, and there was no way I could copy anything of his, even now!   I finally confessed my dastardly sin to  him last summer.  He laughed and said “I hope it worked out for you.  I did the same thing when I was learning.  I’m flattered you liked my work enough to try.”  Again, a very gracious professional.  And my piece never looked even close to his.

As Harold O’Connor once told me.  ”Congratulations!  Your piece is in a book.  Now there will be a thousand copies out there.”  Maybe, if others liked it. Maybe not. It doesn’t matter.  I made it because of what it meant to me, and if someone copies it, they won’t get that same feeling.  So I tell my students, “You don’t want your work copied?” Then make  it, put it in a zip lock bag,  put it in a drawer and never, ever let anyone else see it.  They laugh and say “Yea, right.” Truthfully, that is the only way your piece may never be copied or inspire anyone else.  Personally, I think that is sad.

So everyone, just relax.  Will some one copy you exactly?  Heck, I can’t even copy my OWN work.  But if someone does,  think highly of yourself, you have inspired someone.  Be proud of that.  Someone thought enough of your work to imitate it.  Now if they signyour name to it, that’s a different story. But with the internet, and you put your work out there, it may be imitated or copied if the design is good.  But also think back,what inspired you?  Maybe somewhere in the back recesses of your mind you saw something similar to it.   You changed the bail or added a longer stone.  To truly make someone’s inspiration your own, change it 25%,  then change it another 25%.  Then it becomes your own.  Just try it, because its easier than you think.  My idea book is full of pictures by other artist that I pasted in and love to look at for inspiration.  But that’s what it is–inspiration.  Please don’t  copy designs from a fellow artists sketchbooks, that just not nice, but to use something as inspiration and to change it and make it your own, then you can call yourself an artist.  And work on being a gracious professional.

That being said, I still find the greatest inspiration is nature, and not someone else’s work.  But I still LOOOOVVE looking at other’s jewelry.

Now I have to go call Todd and hassle him again about using “my  cone” earrings.

Have a great time designing  and exploring jewelry–

Lexi

Is it Art or is it Craft?

I know I recently posted a very philosophical post on “The Zen of the Process”, and it just might be the mood I’m in right now.  I’m creating a lot and have a lot of time to think while I’m at my bench.   So I hope you will read this, as it’s the best definition I’ve ever heard of “Art” verses “Craft”.

My mentor Harold O’Connor was recently visiting.  As we sat after breakfast discussing what’s going on in the European jewelry scene, we got on the topic of craftsmanship in our jewelry.  Now, if you have even seen Harold’s work, you know it as immaculate craftsmanship and it is pure art.  I respect and admire both the man and his work. In fact, Harold’s work is in the Renwick Gallery at the Smithsonian, the Victoria and Albert Museum in  London, the State Art and Work School in Pfozheim, Germany, and more of the world’s most more prestigious museums and galleries.  Need I go on? (Just Google him, he’s probably the most famous art jeweler/teacher in the world, and totally makes every piece himself.)  Let’s just say the kid knows his jewelry.  I am so honored to have him as a friend.

So I asked the simple age old  question:

 ”Harold, what is the difference between art and craft?”

He picked up one of my very old first pieces and said:

“If you forgive me for saying so, this is craft.”

Chinese Writing Stone PendantThe piece was simply a large sharped angled piece of Chinese Writing Stone fromGary B. Wilson that I bought years ago.  The silver backplate extends beyond the stone, and has some holes and a cut out space that replicates a shape in the stone.  Design-wise it’s not so great, this I knew, but the craftsmanship is excellent.  The bezel is tight against the angled stone, and each point is a tight angle with no  rounding of the corners of the bezel around the stone.  I was not upset that it was looked upon as “craft”, for I kind of felt that myself.  But I loved the piece for its simplicity.  (OK, for the “Zen” of the piece.)

So I asked Harold, “What’s the difference?”

and Here It Comes: words of the master,  though he said he could not take credit for this, it came from someone else…

“A maker of chairs makes 6 chairs.  They all look alike, the first one and the last one.  Each is identical.  That’s a craftsman.  The artist doesn’t know exactly what  his finished piece will look like.  He may have an idea, but doesn’t know exactly because he may change his mind during the construction. That’s art.”

So I added “The true artist knows when to stop.”  Harold smiled.

I have held these words close to my heart since he said that.  Its the best I’ve ever heard.  And now I know how to design.  Thank you, Harold.

The Price of Silver

As I starting writing this, today’s price of silver was at $39.33.  It’s gone up 24 cents since I started writing this post.   (I used to have an app that beeped my cell phone every time the price of silver/gold changed.  Well, I quickly got rid of that annoying little pest!)

Silver is quickly headed toward the $40.00 mark. It’s up about 3 dollars from my last silver purchase, about a month ago. Adjusting for inflation, the price has never been this high.  Back between 1973-1979, the Hunt Brothers of Dallas, Texas, (yep, Hunt’s ketchup and tomato sauce–the same Hunts), along with some wealthy Arabian friends,  tried corner the market on silver.  They amassed over 200 million ounces of silver, which was basically half the world’s supply at that time.  Silver had been at $1.95 in ’73, and by the time the Hunts got through with their little shenanigans, around 1979-80, it was peaking around $53 dollars an ounce!  Well, the Federal Reserve got involved and halted the buying.  In one day, March 27th, 1980, the price dropped from $21.62 to $10.80! Countless speculators lost millions, and the Hunt brothers were convicted of conspiring to manipulate the market. When I got into making jewelry back in the 80′s, the price had dropped even more.

We will probably never return to 1973 prices, and if we do, that means the US and global markets are in a severe crisis. The stock market and  global situations continue to control the silver, gold and other precious metals prices much more than the Hunt brothers were able to manipulate. Here in the US, there are more people buying into gold and silver as inflation protection.   This speculation has a great deal to do with pricing, but also the worlds population is growing, and with the astounding price of gold, more people are buying silver and  hoarding it. Even when we think of gold, in the US, we use and wear a lot of 14k gold.  In other parts of the world, in societies where people wear their wealth, their jewelry is 18, 22 and in some cases, even 24k gold.  They consider 14k to be “junk” gold.  So that, along with foreign governments hoarding precious metals as inflation and civil unrest grows, creates more demand and more price increases.  Also, gold and silver are used in many industrial uses, in automobiles, in medical equipment, in so many other aspects. Gold and silver are  historically linked in prices, but in the past year or so, silver prices have risen at a  higher percentage rate than gold.

All this has greatly hurt jewelers, especially the little guy who is not a major buyer of precious metals.  When we buy 2 or 3 6×6 sheets of 20 gauge, while it sets us back quite a bit, that doesn’t constitute much of a purchase in the whole scheme of things.

Several students have asked why the jewelry supply stores charge so much more than the “spot” market price of silver.  ”If I buy two ounces of wire, how come I’m charged $100.00 if the spot market is $37.00.  I should only pay $77.00″, they complain.

Well, the mill (the refiner) must buy  a set amount of raw material–say 5000 ounces of unmilled silver, or other metal.  I’m not sure of the exact amount you have to buy, but at one time it was 5000 ounces. Then that silver must be refined. Copper must be added to silver in the correct percentage, thus making sterling silver.   (925% silver and 75% copper) Then the sterling silver is melted and milled into sheet, wire, tubing or whatever that particular mill makes.  The cheapest way to buy sterling is in casting grain form, but if you want plate or a “milled product”, you are paying for that.  That is called a “mill charge” and it varies from mill to mill. Sheet is one form of a milled product, and if the mill must make wire, that’s one more process, and they charge for that. You want decorative wire, that’s another thing the mill must do to the wire, so they charge a bit more for that.  Oh!  Tubing?  They really charge for that!

Then they ship it to the jewelry supply store.  Well, you can imagine, shipping metals is heavy, and UPS doesn’t do that for free, so there’s an additional charge. Finally your supplier must make a profit, so that’s tacked on.   Jewelry stores do not buy silver and mark it up 100%, or even 50% and sell it.  They make very little profit on metals. Most stores carry metals as a convenience to their customers who come there to buy tools and supplies. (I remember in my innocence as a beginning jeweler, coming from a family who had owned retail shops and galleries, I thought that if I had a tax number, I could buy my silver and tools “wholesale”, 50% off the marked price.  I blush now, thinking about that!)

So if you think the price of silver is high, feel free to go out, find and buy your own raw silver, remove all the dirt, rocks, bugs, roots, etc.  Then melt it, add the copper, and roll it into a sheet.  And let me know how that’s workin’ for you.  You will learn that you just have to bite the bullet and pay the price.

Supply stores are now in a tenuous position.  With the uncertain pricing of metals, what they buy today may be worth more tomorrow, or it may drop and they lose money.  Some supply stores are cutting back on ordering silver from the mill, and you really can’t blame them. What would you do? We think twice now about going to buy $200.00 worth.  What if you had to order $5,000.00+ worth so your customers would have what they need?  So cut the supply houses some slack and don’t growl too much, its not their fault.

Where will this end?  I don’t know.  No one knows.  It’s all just a guess. I love making silver jewelry, so I will continue as long as I can, and I love copper, too, and am making more copper and brass (bronze?) jewelry.  But copper is going up in price, too.   I refuse to make paper jewelry.  It’s a bear to solder!

For more info and to keep tab of the daily changes on all precious metals, go to kitco.com and you can download that annoying little beep for free, or you can just check it several times a day yourself.

Frustratingly yours,

Lexi

The Life of a Jewelry Artist

Hi Everyone–

Here in the Rocky Mountains, the aspen are turning bright gold and some are burgundy.  They are truly magnificent against the turquoise Colorado sky.  But the true mark of autumn is the Denver Gem and Mineral show, which just finished last Sunday.  Though in reality I needed nothing, I cannot help going to see what Mark Lasater at The Clam ShellGary B. Wilson, Greg King-Falk Burger (the duo humorously known as “Burger-King”), Michael Hendrix and many more  have in stock.  They had less in stock after my friend, student and sister, Kathleen Krucoff, my students and I left.  And remarkably, we do not fight over stones.  We all have such different taste in our jewelry and colors that there is always plenty for all of us. Well, truthfully, Kathleen and I do tussle a bit over red jasper, Chinese Writing Stone, and petrified palm wood, but if you follow her blog, you know she is a purple lover, so she buys a lot more purples, while I go for the “earth tones”. (I’m such a child of the 70′s).  As I predicted on my Tucson blog, Mark Lasater had some gorgeous Red Creek Jasper.   Funny thing about names, it’s now called Cherry Creek Jasper, Cherry Creek Valley Jasper and just plain old Red Creek jasper.  That’s the name the owner of the mine calls it, so I’m sticking with that until further notice.  But there was a lot of it at the Denver show.

Fall is also the time for the Castle Rock Art Festival.  The gem show starts the Tuesday after the Castle Rock weekend, so I’m pretty exhausted.  The Castle Rock show was pretty good for me this year, though not even comparable to “The Glory Days” of the 1980-90′s art festivals.   But I had a great time and I always love meeting the other artists.  This year I traded some work with my newest friends,  fabulous wildlife watercolorist Stephen Koury from Lakeland, FL  and metal artist Pamella Goff from Brighton, CO.  Pamella makes diverse art from old spoons, and her pieces are totally delightful.  Her spoon flower hangs in my kitchen.  It reminds me of a delightful and spiritual sister.   Stephen does these unbelievably realistic nature paintings, and my painting features a Harris Hawk and my favorite petroglyph, the “Moab Man”. It is being framed now, and I can’t wait to hang it in my entry hall.  Both of these artists are so outgoing and wonderfully talented that it makes it the whole show experience pretty wonderful.  Plus, the Castle Rock Festival is one of the best run I’ve ever participated in.  They take such good care of their artists.  Kathleen and I have decided that it’s easier to do some shows together so we are  looking forward to doing more shows next year.

Photo of me (on the right) with Kathleen (on the left) at the Castle Rock Festival this year.

A few blogs back I expressed my feelings about galleries and shows, and thought something has to be done about the way we get our work out there, and yet allow us to do more than “break even” on an event.  After some thought, I realized that what we need is a group of sincere artists who come together and present their work at a well-known, but non-gallery,  location and perhaps start a tradition.

Well, I’m very lucky to be on the Board of Colorado Metalsmithing Association (CoMA), so I took my idea to the Board, and they were receptive to trying something totally new.  Previously, CoMA has only shown at galleries.  Now we will have 28 artists, famous, notables, and emerging, those who answered our Call for Artists, and we will be showing and selling our work at the beautiful Denver Botanic Gardens on Oct 16 and 17.

What is so amazing about this venue is that it is timed to take place along with the showing of Henry Moore’s monumental sculptures.   It was Henry Moore who commented “The most powerful artworks are the largest and the smallest”.  I was thrilled to find that quote, and we put it on our postcards.

I would like to thank Kathleen Krucoff of Krucoff Studios for the design of both our poster and postcards.  Everyone has commented on how stunning and professional they are, and it makes them proud to be a part of the show.

Jewelry at the Gardens ~ Post Card

 

28 Artists at the Botanic Gardens ~ The Poster

So what I’m saying, along with please come see us at the show and sale,  is that we, as artists, are creative people. If you are unhappy with shows and galleries, please take this idea and run with it.  It’s nothing new, but it is a first for a great group of metalsmiths in Colorado.

Look for willing locations in your area.  Look for people who will help sponsor a show, and put one together.  Is it a lot of work?  Yes, tremendously so. Maybe a later blog will be a step -by-step of how to do this, but I’ve put together many shows in Texas and PA.  All it takes is a spark, and you can ignite a whole group of people’s creative processes.  Helping others get “out there”, in turn energizes me, and  I feel a lot more creative.  I hope you will come to see us.  I can promise you it will be worth your time to see what these artisans have created and maybe you will find that right item and become a collector!

Show dates / times / location: October 16 ad 17,  from 9 AM -5 PM, Denver Botanic Gardens, 1007 York Street, Denver Co, 80206.

I’m off to create  something for this “New Tradition”– I look forward to meeting you at this new event, “Jewelry at the Gardens”.  Please mention you read about it in my blog as I would love to know.  Thanks.

Lexi

How to Get a High Polish on Silver

HI Everyone–It seems like I’m always getting this question from students, so I decided to write this to answer the questions.  Please feel free to print it out for your notes or easy reference.  It’s very handy, and if you like high polish, this technique will work every time.  The most important thing to remember:  ”You must put scratches in to take scratches out.”  This means you must make the piece’s finish look consistent and then start your finishing process.  Good luck. -Lexi

FINISHING TECHNIQUES
Lexi Erickson

The Lowdown on a High Polish

You have worked hard on your piece of jewelry, designing it, cutting, and filing and soldering. Now you are ready to “start finishing” your jewelry. You have a few more decisions. How should it be finished?

Give a lot of consideration to your finishing process. When deciding what texture to use on a piece, a mirror finish may not be the most appropriate. It’s beautiful, shiny and elegant. However, it is difficult to achieve and almost impossible for your client to maintain. Nevertheless, sometimes it’s the only finish that will do, so now you need to know how to achieve that sought after look. Pieces with large bold designs work best, not too much texture or detail.  To achieve a mirror finish on a piece takes lots of work, and that work starts the moment you purchase your piece of silver sheet from the supplier.

The metal will usually be stored in some type of vertical storage arrangement while at the supplier and will come to you fairly scratch free. Inspect the metal before you purchase it and make sure it’s free from major blemishes. Don’t be afraid to ask for a different piece if it’s badly scratched. At that time, have the seller seal your metal in a zip lock bag; and do not put it in the same shopping bag with tools. When you get home, if you’re not planning on using it immediately, store your silver vertically, still in a zip lock bag, in a letter holder, such as is sold at Office Max or Staples. These are great for holding all your metals according to gauge. Sometimes I stick clear contact paper on both sides of my metal to protect it from scratches. Just remember to pull the paper off before soldering.

There are 2 steps to achieving a high polish—-polishing, which is removing the highs and lows in the metals, and buffing, which is basically melting the top layer of the metal to achieve a mirror finish, actually moving the molecules of metal.

You will start your finishing process after all soldering is done. No matter how careful you have been, you will have some scratches on your metal. To take scratches out, you must put scratches in. Start by polishing the piece all over with fine sandpaper, and gradually use finer and finer sandpapers. 3M makes some dynamite finishing papers. My favorite is called Imperial Micro-finishing film. It is long lasting and can be used with water or without. This wonderful sandpaper is excellent at removing firescale also. The papers are screen-graded in microns, each grain of “sand” is uniform, thus giving a more consistent finish. If I have some deep scratches, I start with 40 micron, then move to 30, 15 and finally 9 micron. Another favorite is the 3M wet or dry Tri-M-Ite polishing papers. By using these cloth-like papers it is possible to keep fine-tuning your work to almost a mirror finish. Please remember, I love doing the final hand work, and since I’m not a production jeweler, I have the luxury of languishing over a piece for some time  I usually just finish my pieces with sandpaper, and never do the polish wheels.  But I regress.  Both sets of polishing papers are available from most jewelry supply stores.

If you wish, you can use regular sandpaper, starting with a 320, then 400 grit and finer.   Finish with an extra-fine crocus (emery) cloth. Crocus cloth can be purchased from an auto supply store and can be torn into strips for getting into tight spots.

To finish this pre-prep process, use a pumice and water paste rubbed on with your fingers and rub the piece of jewelry until the water sheets evenly on it.  Barkeeper’s Friend, found in the household cleaning section of your local grocery makes a fine pumice paste.

Now you are ready to start working on a wheel, either a larger 6″ buffing machine wheel or the flex shaft wheel. If you are working with wide flat pieces, such as a cuff bracelet, or a large flat piece, use the 6″ wheel. You do not want to create grooves in your piece, which when finished will make a wavy surface, which reflects light unevenly. If working with small pieces, your flex shaft will be the appropriate tool. Use the flex-shaft wheel that will work best with your piece of jewelry, probably a 1-inch wheel. Also, don’t forget to wear goggles and a particulate respirator. 3M makes several very good masks.

TIP: The piece may get very hot. It’s fine to have a small bowl of water close by to dip your piece in to cool it. It doesn’t have to be dried to continue polishing.

When working on the 6 inch wheel, you will use the lower front quadrant of the wheel.  On a clock face it would be the space between 6:00 to 9:00. The wheel is going approximately 50+ mph, so hold on to your pieces carefully and with both hands. Hold the piece in what is called a “break away grip”, which means do not wrap your fingers into the piece. Do not wear long necklaces, loose clothing or gloves, and tie back long hair. Do not take your eyes off the wheel or carry on conversations while working at the wheel. This potentially is one the most dangerous machines in the studio, and must be treated with caution at all times. Always wear goggles or safety glasses.

The term for loading compound on a wheel is to “charge” it. To “charge” the wheel, you hold the polishing compound lightly against the wheel. If you have a new wheel, it’s best to hold an old hacksaw blade with both hands, to the wheel first and get rid of the lint on the wheel. You only have to hold the polishing compound on the wheel a few seconds to coat the wheel. Too much compound will build up on your piece and the wheel cannot do its job.  Re-charge as needed.  Experience will tell you when.

IMPORTANT: There is no need to push your piece of jewelry hard against the wheel. It’s the speed of the wheel doing the polishing, not the pressure. Too much pressure will cause the piece to rip out of your hands. The piece can be slung with maximum force against the back of the machine or across the room. This is then called “redesign by buffing machine,” and can lead to some exciting new design possibilities, but probably not what you originally had in mind.

DO NOT mix compounds on the wheel, which means do not charge the crocus wheel with tripoli or the rouge wheel with crocus. The tripoli wheel is only for tripoli, the crocus wheel is only for crocus; the rouge wheel is only for rouge. If you go from one polishing wheel (tripoli or crocus) directly to the buffing wheel (rouge) without cleaning in between, you are contaminating the buffing wheel. You are putting a cutting compound on a buffing wheel and you will never get a scratch-free polish if that happens.

TIP: I like to put the polishing compounds on treated, colored wheels. Tripoli is always on the yellow wheel, while crocus is always on the pink wheel. Those wheels are specially treated and are a little harder, so they are better for holding the cutting compounds. The white cotton muslin buff is softer and is always for rouge. That way I never get them confused. Also, use a Sharpie to mark the sides of the wheels with the type of compound if you don’t use colored wheels.

It will be fine to use the different metals on the same wheel. You can polish silver, copper, bronze, brass and gold with the same wheel if using the same compound. If you are using platinum or white gold, you will need to use a different set of wheels just for those metals.

Polish in different directions. Do not keep the piece of jewelry in one position. Turn it constantly, and don’t forget to polish the edges and back. For good craftsmanship, the back of the piece should look as nice as the front.

Polish first with tripoli.  Tripoli is a cutting compound and will round off sharp edges and can remove or blend details, like roller printed textures.  Pay close attention to what’s happening on the wheel.  The piece will get very hot, also, and you will get the compound on your fingers. Clean the piece, and your fingers in water, with an ammonia/Liquid Dawn solution and an old, soft toothbrush. Liquid Dawn has a great de-greaser in it, so it cleans the greasy compounds quickly. Take extra care to clean difficult hard to reach areas.  To leave any compound on your piece means it will transfer to the next wheel, which will then contaminate that wheel

Next, use the crocus wheel. This is a step many jewelers leave out, but if you want to have a truly high mirror finish, crocus is essential.  Polish the piece evenly, and look for a consistent finish. Again, clean carefully with the water, and ammonia/Dawn soap solution and a soft toothbrush.

Finally, use the rouge wheel to buff the piece, remembering to constantly keep the piece moving. Personally, I like to finish the polishing with a chamois wheel and red rouge, but chamois wheels are very pricey and get eaten up quickly. I can’t afford to use many chamois wheels! When you have finished with the wheel, do not use a toothbrush to scrub off the stubborn rouge.  Clean under running water with ammonia and Dawn detergent. To get the buffing compound out of crevices, use a cotton swab or toothpicks dipped in the ammonia/soap solution.

There are different colored rouges which may impart different finishes on your work. Some are available under a variety of trade names, such as Golden Glo, used for bronze, brass and copper.  It will make Nu-gold look similar to 18K gold! Use a black rouge for a darker silver look, and blue rouge (sometimes called Picasso)  for an almost pure silver-white finish. White rouge is usually for harder metals like platinum.

Experimenting by using the polishing and buffing compounds is fun. Each one gives you a different look. If you have done your homework, and taken care of your metal all along, you will have a minimum of finishing. If not, you may have more hand polishing to do. To do too much polishing with the machines will lead to loss of detail on your piece and possibly some smoothing out of edges and blending of surface textures. In some cases it will thin the metals when overused.

So, the final finishing processes should be:

1. the hand finishing

2. tripoli (the brown compound)

3. clean

4. crocus, (the green compound)

5. clean

6. rouge (the red compound) on a soft white muslin or wool wheel

7. final cleaning

TIP: As an alternative, you can use Zam as a final polish. It is a greaseless formula, which yields a high polish.

Wash with clean water and blow dry with a hairdryer. Use care if using a polishing cloth as this will leave scratches on your piece and you may have to go back to the rouge wheel again for a spotless finish.  The microfiber cloths will also dry your pieces, but do not rub the cloth on the piece, just let the cloth absorb any water. (Sometimes Flitz or semichrome may be used for a final “glow”. Put it on with your fingers, and wash off with your fingers and then, blow dry.

IMPORTANT: NEVER, EVER polish or buff a chain on the wheel, even if you have those wooden “chain holders”.   Polish chains in a tumbler or by hand. High speeds and loose chains are a dangerous combination and can cause bodily damage.

This is an arguing point among jewelers–I finish all the way up to a crocus finish, even if I’m putting a patina or a distressed finish on my piece.  Nothing is uglier than to have a light patina on a piece, and 3 months later finding firescale showing its ugly purple head and peeking thru a patina. So I “take it up” and then “bring it back down”.  Try it, you won’t be disappointed.

TIP: Ever get “lines” on a highly buffed piece?  Well, then, Check your buffing wheels. If you see strings hanging from the wheels, even short ones, cut the strings. They are cutting grooves into your metal. I keep my personal wheels clipped of all long strings and “fuzzies” and they feel like velvet.
By doing these steps in the correct order, you can achieve the ultimate high mirror finish. All your hard work will payoff with an elegant and sleek contemporary look. Take care, use common sense and good luck.

You may share this info with your classes or friends.  Please give me credit for writing it.  Thanks.

Copyright–Lexi Erickson, 2010